The Fortress Vibration sensor is operated by a 23A battery. This sensor can detect the vibration of an attempted forced entry. Installation is simple when using the included double sided sticky tape. When installing make sure the vibration sensing portion of the unit resembles an M or a W.

The Eye Sight HD 720p WiFi Camera from Fortress Security Store is a stand-alone, WiFi-enabled camera that works with a free mobile app for iPhones / Android phones. The sensors from your Fortress Security System can also be programmed to the camera. With an SD card inserted (not included), you can record video and play it back later. Additionally, you can view a live feed of the camera from your smartphone directly.

The Fortress Panic button serves to trigger an alarm with 1 easy push of a button.

The Fortress Ani Standard Motion Detector uses Passive Infrared technology to detect motion. These sensors can pick up motion up to 25 feet from the device. With a viewing angle of 110 degrees horizontally and 90 degrees vertically you can be assured that these sensors will detect any intruders. Communication back to the main panel can be from up to 150 feet away depending on obstructions. These Motion Detectors use 2 AAA batteries.

Fortress Door/Window Contact sensor is a two piece sensor that detects when a door or window is opened. These devices operate with a 23A battery. Mounting these devices is very easy. Each piece of this 2 part sensor mounts using double sided sticky tape that is pre-cut for the component. The sensor or the magnet can be placed in any orientation so long as the magnet is not separated from the sensor by more than ½ an inch.

The Fortress Panic Button serves to trigger an alarm at the push of a button. These Panic Buttons can be used in businesses to trigger silent alarms, In homes to trigger sirens in the event of a break in while you are home or as medical alert devices.

The Fortress Water Sensor is designed to protect you in case of flooding, which could damage your building. If water reaches the level of the sensor, it will immediately send a message to the control panel.

The Fortress Pet Immune motion sensor is a Passive Infrared Motion sensor that will ignore most pets up to 50Lbs. This style of sensor is ideal for homes with small dogs or cats. Pet immune sensors are powered by a 9V battery. Installation is simple. The sensor has a 3 piece mounting bracket that snaps together and hangs on the wall with 2 screws that are included with the sensor.

The Fortress Smoke Detector will trigger your alarm system to call you in the event of a fire. It uses a photo Electric style sensor to detect the smoke. These devices are powered by a 9V battery. This sensor comes with a mounting bracket and screws making installation very easy.

The Fortress Remote control Keyfob is used to Arm in the home or away mode, Disarm the system and Trigger panic alarms. With a range of 150 feet, you can disarm your system before entering the building. Remote control Keyfobs are powered by a 23A battery.

The Fortress Glass break sensor is a dual function sensor. Not only does it detect the sound of breaking glass, when installed directly on a window it will also detect the vibration of a strike that is not sufficient to break the glass. These sensors plug into AC power for their primary source and cover a 50sq foot area. (5 feet in every direction)

With the Fortress Safeguard Stand-Alone Alarm, you can easily protect entry ways, points of access or anything that opens and shuts. The Safeguard is a magnetic contact sensor that activates the alarm or doorbell chime when the contact or any additional Fortress Security Accessories (sold separately) are triggered. Up to 20 additional accessories can be added, or it can be used independently as a standalone alarm siren. Choose between two distinct modes – Siren and Doorbell.