Memorial Day Sale
Get 20% OFF on All Products Use code: MEMORIAL20
Sale Ends In :

Contact Us
206-981-5371
0 CART
x

Sensors / Accessories

This article contains instructions for programming a sensor or accessory with the Vea 3G/4G GSM Security System.

Vea 3G/4G GSM Security System

NOTE: If you purchased the sensor as part of a kit, then it has been pre-programmed to the main panel already, and no other programming is needed. Follow these steps below if you have purchased a sensor separately, and are now adding it to an existing system.

Programming a Sensor / Accessory with the Vea 3G/4G GSM Main Panel:

  1. Turn off any motion detectors to prevent accidentally programming them.
  2. On the Main Panel, press any button to wake up the screen.
  3. If Keypad Lock is enabled, enter your 4-digit password.
  4. Press the Menu Button [three horizontal lines].
  5. Scroll using the Arm and Disarm buttons to the "Add Accessories" menu and press the Checkmark.
  6. Select either "Add Remote Control" for a Remote Key Fob or "Add Detector" for any sensors or detectors.
  7. Enter the desired 2-digit Zone number to add the accessory into, then press the Checkmark*.
  8. Trigger the accessory. The panel will read "Add successful!"
  9. Press the Back button to return to the main menu. If needed, navigate to Zone Settings and adjust the settings for the Zone as desired*.
  10. Press the Back button again to return to the main screen.
  11. Turn on any motion detectors that were turned off.

* For more information about Zones and Zone Settings,you can refer to the Vea User Manual.

 

How To Trigger The Accessories

Door / Window Contact - trigger by separating the magnet from the sensor

Door / Window Contact

Motion Detector - trigger by waving in front of it

Motion Detector

Pet Immune Motion Detector - trigger by waving in front of it - you may have to press the black Coding button

Pet Immune Motion Detector

 

Remote Key Fob - trigger by pressing any button on the fob

Remote Key Fob

 

Smoke Alarm - trigger by pressing the Test button

Smoke Alarm

Panic Button - trigger by pressing the Panic button

Panic Button

 

Vibration Sensor - trigger by tapping on the vibration sensor

Vibration Sensor

Glass Break Sensor - trigger by tapping on it

Glass Break Sensor

 
Get
10% Off
On Any Order Value by Subscribing
NO Thanks