Contact Us
206-981-5371
0 CART
x

RFID Key Tags

This article contains instructions for programming the RFID Key Tags with the rectangular RFID Keypad.

RFID Keypad

Programming an RFID Key Tag to the RFID Keypad

  1. Press any button the RFID Keypad to wake it up.
    (The blue backlight will turn on)
  2. Enter the RFID Keypad's 6-digit Admin Password (123456 by default), then press #.
    (The light in the top left corner will light up to let us know we are in programming mode.)
  3. Enter a zero, plus the 2-digit slot number followed by # (For example, 001#, or 002#, or 003#, etc.)
  4. Swipe the Key Tag in front of the "RFID" symbol on the Keypad to add it.
    (The Keypad should beep.)
  5. You can repeat steps 3 and 4 to add more Key Tags (using different slot numbers for each Key Tag you add).
  6. When finished, press * then # to exit programming mode.

 

Removing an RFID Key Tag from the Keypad

  1. Press any button the RFID Keypad to wake it up. 
    (The blue backlight will turn on)
  2. Enter the RFID Keypad's 6-digit Admin Password (123456 by default), then press #.
    (The light in the top left corner will light up to let us know we are in programming mode.)
  3. Enter a one, followed by the 2-digit slot number followed by # (For example, 101#, or 102#, or 103#, etc.)
  4. You can repeat step 3 to remove more Key Tags
  5. When finished, press * then # to exit programming mode.
 
Get
10% Off
On Any Order Value by Subscribing
NO Thanks