How do you program this to the GSM system?
Hello! Here is an article with the programming steps for adding a Small Plugin Strobe Siren to the GSM alarm system: https://www.fortresssecuritystore.com/programming-instructions/gsm-small-indoor-plug-in-siren Please let us know if you have any other questions! Sincerely, Fortress Security Store
Sometime the red LED lights on this siren stay on. I can't find any information to explain why? I looked at the alarm log and nothing is out of the ordinary.
Hi Peter Usually the light on the siren will come on and stay on when the system is armed. If it is continuing to have issues, you can contact us at email@example.com or 206.981.5371 Thanks, Jessica
How do you set it up for a SO2 system?
Hi Glenn, To program the siren to the S02 system, follow these steps: Make sure your system is disarmed. Hit the panic button on your keyfob. Plug in the siren then push the black button on the side of your siren until the lights turn and stay on. Disarm your system, and the siren will beep a few times in response. Unplug your siren for about 10-15 seconds Plug in again and Test! Thanks, Jessica
Install s02 system. No instructions included. Why not?
Hello Richard, I apologize that the manual was not included with your S02 system. All of our user manuals are available on the support link of our website- http://www.fortresssecuritystore.com/user-manual-and-support-8.html; Thanks, Jessica
Can this indoor siren be programmed to "chirp" when the alarm is armed and disarmed?
Hello Bill, When hooked up to a S02 or Total Security panel the system can be set to chirp whenever a door is opened. Thanks, Jessica